D-BORE1 CNC Drill

D-BORE1 cnc drill, being a vertical machine and due to its compact size, allows you to have a CNC drilling center in only 2m2 of space in the workshop. In addition, the piece to be machined rests on one of the edges, avoiding scratches thanks to the special plastic table that acts as a guide in the movement.

Likewise, the force of gravity keeps the piece in contact with the bearing base, eliminating the need for an adjustable clamp and avoiding adjustments for each piece, as occurs in horizontal systems.

Finally, the dust generated by the perforations is easily collected through the suction outlet located at the base of the machine, thanks to the action of gravity.

SOFTWARE

The Gcad Lepton software stands out as one of the most intuitive on the market. It offers ease of use, speed and flexibility. From the comfort of the office, the information can be copied to a flash drive without having to spend time programming the machine. The program is then uploaded to the machine via menu selection or by reading the barcode.

D-BORE1 CNC application

After filling in the boxes with the measurement information for the specific macro, the layout is generated. of the piece, immediately, as simple as that!

D-BORE1_GCad_CNC

Head_D-BORE1

ELECTRONIC PROBE

Why is the electronic probe necessary?

We know that most craftsmen make cuts with square machines traditional, as a result there are always small flaws in the length of the cut and in the squares of the piece.

D-BORE1_Electronic probe

Perfect assemblies thanks to our front head system and our exclusive electronic feeler that corrects the position of the holes with respect to the imbalance and the length of the piece.

TECHNICAL DATA D-BORE1 cnc drill (Dimensions in mm)

• Y axis maximum drill position: 650
• Maximum saw grooving height: 600
• X axis: 3000
• Z axis (material thickness) (optional 10 – 50) : 10-40
• Travel speed25m/min
• Minimum piece to machine. (x)250 (y)60
• Piece height700
• Head motor1HP
• Packaging:1520 x 800 x 1750
• Required air pressure7 Kg/cm2
• Weight approx (kg)400

Jobs you can do

• Holes from 3 to 35mm in diameter.
• Perforations for Eccentrics (fittings for quick assembly.
• Slots with milling vertically.
• Slots with saw in horizontal direction (x axis) width configurable by software.
• Kitchen hinge perforations, configurable to any brand on the market.
  

Drill head

• With 360º rotation, which rotates (every 90º) and is oriented according to where the drill is programmed by diameter of hole and per side of the piece, it has four drill bits and the saw for grooving.
• Bit clamping by standard system .

Standard equipment

• Vertimaq numerical control.
• Gcad Lepton design program, specific for carpentry.
• Configured to drill parts on the machine.
• Head with 4 bits, 5mm, 8mm, 20mm, 35mm.
• Saw 90mm diameter, maximum groove depth 10mm.
• Voltage: Single phase 220V (inverter converts to three phase)
• Electronic probe to correct the length of the piece and the position of the holes with respect to square deviations.
• Centralized manual greasing.
• Servo motors

D-BORE1_information