Drillboy 1000 (dimensions in mm)
Y axis (maximum drilling position) 900
Grooving height max with 830 saw
X 3000 mm
Z axis (material thickness) (optional 10-50) 12-50
Maximum travel speed 25 m / min.
Minimum piece to machine. (x) 200 (y) 60 (z) thickness 12
Maximum height of the piece 1000
Main motor 400V / 230V three-phase 1HP
Dimensions (mm) 1150x620x … 1800
Air pressure required 7Kg / cm2.
Weight (kg) 360
Jobs that the Drillboy 1000 Drill can perform
– Holes from 3 to 35 mm in diameter.
– Slotted with vertical cutter.
– Holes for eccentrics (accessories for quick assembly)
– Slots with saw horizontally (x axis) width configurable by software.
– Holes for kitchen hinges, configurable for any brand on the market.
Drill head
With a 360º rotation, which rotates (every 90º) and is oriented according to the programming of the drill according to the diameter of the hole and the side of the piece, it has four drill bits and the slotting saw.
Drill clamping by standard system.
Standard equipment
Vertimaq numerical control.
Gcad Lepton design program, specific for carpentry.
Set up to drill parts on the machine.
1 hp head motor.
Head with 4 bits, 5mm, 8mm, 20mm, 35mm.
90mm diameter saw, maximum groove depth 10mm.
Voltage: three phase 400v / 230v.
Possibility of single-phase connection (see optional)
Electronic probe for the correction of the length of the piece and the position.
of holes with respect to square deviations.
Centralized lubrication at two distribution points, with a manual grease pump. (automatic option)
Reviews
There are no reviews yet.