Drillboy 800
Thanks to the force of gravity, the workpiece always keeps in contact with the bearing base.The zero point of all measurements, does not need an adjustable press, avoiding time losses in the adjustment of the machine for each piece, as occurs in the horizontal systems.All the dust generated by the holes falls by gravity and goes directly to the suction outlet which is at the base of the machine.
Drilling tools:
Y-axis: 850 mm (maximum) – 60 mm (minimum)
Axis X: 3.000mm. (max) – 250mm. (min)
Z-axis: 12 mm (min) – 50 mm (max). (material thickness)Standard working height (Y-axis): for drills: 750 mm. Slots: 680mm.Axis speed: 25mts/min.- Drill
With a rotation of 360o, which rotates and is oriented according to the place where the drill is programmed by the diameter of the hole and on the side of the piece, has tools that include a diameter of 8 mm for making handles, grooves, cuts and endless work, three bits, one right, one left, one for cups, one for eccentric and the groove saw.
Works you can do Drillboy 800
– Holes from 3 to 35 mm in diameter.- Milling.- eccentric.- Kitchen hinges, configurable to any brand in the market.
– Slots with horizontal saw (X axis). configurable width by software. Standard equipment
Vertimaq numerical control, with or without computer
– Protections under EC standards.- Packing measures: 1220 x 800 x 1700 mm.
Cody –
Hello great website! Does running a blog similar to this require a lot of work?
I’ve no expertise in computer programming however I was hoping to start
my own blog in the near future. Anyhow, if you have any ideas or techniques for
new blog owners please share. I understand this is off topic
nevertheless I simply needed to ask. Appreciate it!
Johnny –
I could not refrain from commenting. Exceptionally
well written!