The CNC Vertical Drillmaster occupies the least space, it’s a record to have a cnc drill center in just 2.5 m2 of your workshop.
The piece to be machined always supports on one of the edges, all its weight resides in that part, the special plastic table, only makes guide in the movement, thus avoiding scratches in its surface finish, so that the view of the cabinet does not suffer friction.
Thanks to the gravity force, the workpiece is always in contact with the bearing base, the zero point of all measurements, no adjustable presser needs, avoiding time losses in adjusting the machine for each piece, as in the horizontal systems.
All the dust generated by the perforations falls by gravity and goes directly to the suction socket on the base of the machine.
The software Gcad + Gplus Lepton, with certainty, one of the most intuitive on the market, provides ease of use, quickly and flexibly. From the comfort of the office, without occupying machine time in programming, the information is copied to a pendrive, and it is carried to machine, by selecting by menu or by means of the reading of the barcode the program is loaded.
After filling the boxes with the information of the measurements for the specific macro, it generates the design of the piece, immediately, as simple as that!
Works you can perform CNC Drillmaster vertical machine
-Holes from 3 to 35mm in diameter.-Pantographs, locks, locks, bolts in doors and frames, stained glass, decorative designs, etc.-Kitchen hinge holes, configurable to any brand on the market-Slots with saw in horizontal (x axis) width configurable by software.
-Slots with strawberry in a vertical and horizontal direction.
Drillmaster Drill Head
With 360o turn, which rotates (every 90th) and is oriented according to where the hole is programmed by hole diameter and side of the piece, drill in the 4 edges of the piece, saw for the groove.
Vertimaq numeric control.Design program Gcad Lepton, specific for carpentry.
Configured for drill parts in the machine.
Head with 4 bits, 5mm, 8mm, 20mm, 35mm.Saw 90mm diameter, maximum groove depth 10 mm.Possibility of single-phase connection.(see optional)
Electronic tracer for long correction of the workpiece and the position of holes in respect of square offsets.Centralized grease at two distribution points, with manual lubrication pump. (optional automatic)