The FV1 JULCE CNC vertical drill is an incredible machine that will only occupy 1.8m2 of your workshop.
Thanks to the force of gravity, the piece is always supported on its base, thus avoiding the risk of it being misplaced when machining it.
Its exclusive “quick fit” pneumatic pressure part clamping system always ensures its position against the zero stop. The placement of parts, in turn, is guided thanks to Vertimaq’s exclusive intelligent location assistance system, where a series of LEDs indicate the length of the part to be machined, both in field A and in Field B of work, thus allowing the easy location of the clamping stops before loading the piece.
The FV1 JULCE model has a useful 900 x 2440 mm work table, with a martyr top that can be replaced as wear requires it.
It also has an auxiliary table for the edge drilling process, allowing the machine to be used for different applications either simultaneously or in stages, thus allowing the production process to be adapted to the needs of each one.
Double piece or “pendulum” working system
The work table is equipped with a left stop and a right stop, thus being able to divide the table into field A and field B, allowing two pieces to be worked simultaneously, such as right side and left side, the program manages the work, and can be loaded and unloading parts as the head moves to the opposite field, optimizing the production process, giving it agility and speed.
GCodeDesigner software, certainly one of the most intuitive on the market, provides ease of use, speed and flexibility. With the possibility of doing so from the comfort of the office, without taking up machine time in programming, it is sent via a WiFi signal (1), copying the information into the memory of the machine itself or on a flash drive, and it is carried out machine, by means of menu selection or by reading the barcode, the program is loaded.
Commitment to the environment
Since its foundation, Vertimaq has been developing machines and equipping them with systems that allow obtaining the best results in machining processes, requiring the lowest possible energy consumption, both in the manufacture of the machine and in its subsequent daily operation.
Today, the cnc machines manufactured by Vertimaq, each one in its respective category, are the ones that consume the least electricity in the world, in the furniture manufacturing sector.
Currently, at its headquarters, artificial lighting is not needed to assemble the machines, since natural light is used to illuminate the factory during normal working hours.
Jobs that FV1 JULCE can do
*Flat and edge holes
*Lower slot with cutter, up to 10.5mm.
*Large diameter holes for the passage of smoke suction tubes.
*Milling of embedded handles
*Clipping to the groove profile
*Empty to place glass in the kitchen doors.
*Mechanized cabineo and ovvo system.
*All types of machining necessary to assemble kitchen furniture, showcases, bathroom furniture.
*Electronic probe system to correct the position of the mounting holes, caused by the false square and the length of the part.
*Easy programming on touch screen.
*3PH 380V/220V drill motor
*Power required 0.7Kw
*Single-phase 220v connection (INVERTER)
* Travel speed 25 m/min
*Dust extractor required minimum capacity 2300 m3/h
-hinges of any brand
-Cutter slots in any direction
It consists of three units with independent output (pneumatic activation)
Min-max diameters of the tools: Ø3-20mm
Vertimaq Numerical Control,
Hybrid servo motors with encoder
Prismatic Linear Guides
220v single-phase connection.
CAD CAM software Basic version for holes and slots
3 tools: 5mm, 8mm,15mm
Hand Grease Pump
Electronic probe in the head to correct the position of the holes by copying the distance to the edge, also referring to the length of the piece as in the false square.
*Program for the office.
*Code bar scanner.