ROTADOOR- USEFUL WORKING MEASURES BY AXLES:
X: 2100 mm
Y: 50 mm
Z: 100 mm
Axis speed: 20mts/minute.
– 1 milling machine MOTOR from 1.5hp to 18000 rpm, high frequency. For foundries and furrows.- Vertimaq numeric control.- Electronic probe to achieve the exact depth of each hole in both the door and in the frames/frames (as all doors have curvature on the edges)
– The GPLUS Lepton design program allows the design of works in doors, any type of hinge and lock, both indoors and outdoors (armoured).- Design tool, with replaceable plate, useful for locking lock and bolts 14 mm wide (lower diameters require a special tool)
– Suction intake.- Centralized lubrication (manual pump).- Retractable longitudinal pneumatic presser, used to press the door as well as the frames/frames.- Work system: the machine works at a song at the same time, like conventional machines for the machining of doors but vertically.- Exclusive door rotation system: once the bolts have been machined, the door is rotated manually in 5 seconds without having to lower it from the base, the door remains standing on the turntable.- Mechanized time of a gate with three bolts and normal lock: 2 minutes. (including the placement of the hinges by the operator, since during the lock’s machining, the bolts can be placed).
– Start time: 1⁄2 hour, the machine is supplied with your connected cabinet. Applications: bolt and locks machining.- Protections under EC standards.
There are no reviews yet.