VBORE. Thanks to the force of gravity, the part is always in contact with the bearing base, the zero point of all the measurements, avoiding time losses in adjusting the machine for each piece, as in the horizontal systems.
All the dust generated by the perforations falls by gravity and goes directly to the suction socket on the base of the machine.
The vertical machine occupies the least space possible, it’s a record to have a cnc drill hub in just 2m2 of your workshop.
The piece to be machined always supports on one of the edges, all its weight resides in that part, the special plastic table, only makes guide in the movement, thus avoiding scratches in its surface finish, so that the view of the cabinet does not suffer friction.
Jobs you can do VBORE
-Holes from 3 to 20mm in diameter.-Eccentric Holes (fittings for quick assembly)
-strawberry slots in any direction
– cut the profile of gola, dummy shooters, designsDecorative designs (optional software required)
The Gcode Designer software, with certainty, one of the most intuitive on the market, provides ease of use, quickly and flexibly. With the possibility of doing it in addition from the comfort of the office, without occupying machine time in programming, it is sent via WiFi signal (1) by copying the information in the memory of the machine itself or in a pendrive, and is machine-based, by selecting by menu or by reading the barcode the program is loaded.
3 bits with standard system clamping.
VBORE standard equipment
Y(mm) to Hole No1 900, X(mm) 2800, Z (Material thickness mm) 30Speed & Header 25mts/min
Cliping speed: (Limited by normative) 20mts/min
Minimum machining part: (x)240mm,(y)60mm, 12mm thicknessPart Passage (height in mm) 900
Required air pressure 7Kg/cm2
Required space (mm) (machine mounted) 500 x 2800 mm
vertimaq numerical control, 3-axis control,
Servo hybrid motors
Design program GcodeDesign (owner) Configured for machine parts drilling, communication with Lepton Pack furniture design program.Engine head 1 hp
Head equipped with 5-8-15mm drill bitsVoltage: 220v single phase Inverter system (low consumption)
Electronic tracer for long-part correction and drill position relative to the false bracket.Remote connection, wi fi connection, remote access via internetTop Prensor with Manual Positioning
Brackets for input and output material, rebatible
There are no reviews yet.